Kenneth Spencer Research Library

N. Kıvılcım Yavuz is conducting research on pre-1600 manuscripts at the Kenneth Spencer Research Library. Each month she will be writing about a manuscript she has worked with and the current KU Library catalog records will be updated in accordance with her findings. 

Kenneth Spencer Research Library MS 9/1:A22 contains an unstudied fragment of Geoffrey of Monmouth’s Historia regum Britanniae [‘History of the Kings of Britain’]. Geoffrey of Monmouth (approximately 1095 – approximately 1155) completed his Historia, also known as De gestis Britonum [‘On the Deeds of the Britons’], sometime before January 1139. One of the most renowned works of medieval historiography, Geoffrey’s Historia received acclaim almost instantaneously and was very influential not only in Latin but also in vernacular writing throughout the Middle Ages. The Historia opens with a prologue in which Geoffrey claims to have translated into Latin “a very old book in the British tongue” that he received from Walter, archdeacon of Oxford. The reason why he decided to translate this work, Geoffrey explains, is because he was not able to find any information about the early kings of Britain in other renowned historical works he consulted. Thus, in the Historia, Geoffrey traces the history of Britain from its first king, Brutus of Troy, to the end of the reign of Cadualadrus (Cadwaladr, reigned from approximately 655 to 682) in the seventh century.

There are close to 230 witnesses of Geoffrey’s Historia but the version of the text contained in MS 9/1:A22 is found in only ten surviving manuscripts, including this fragment. This rewriting of Geoffrey’s Historia is conventionally called the First Variant. Scholars have argued that the revision was done by a contemporary of Geoffrey and was completed before his death in around 1155, within a mere fifteen years after the Historia began circulating. The extant manuscripts of the First Variant date from the beginning of the thirteenth century and later. We know that the First Variant must have existed by 1155 because it was one of the sources used by Wace (approximately 1110–after 1174) in his Roman de Brut, a verse adaptation in Anglo-Norman of the Historia regum Britanniae. In its broad outlines, the narrative in the First Variant corresponds to the original of the Historia regum Britanniae. The majority of the chapters, however, are shortened and almost entirely rewritten. There are also a few additions to the narrative, some of which are deemed significant in changing the storyline, such as supplementary information about the history of Rome that was derived from the Historia Romana [‘Roman History’] of Landolfus Sagax.

The portion of the Historia regum Britanniae in the fragmentary MS 9/1:A22 contains parts of Chapters 31–39. Based on the variations, the text as it is preserved in MS 9/1:A22 most closely matches with that of Aberystwyth, National Library of Wales, MS 13210D, one of the eight witnesses that was collated for the edition of the First Variant by Neil Wright in 1988. The beginnings of Chapter 34 (begins with “Succedente …” on line 3 on folio 1 recto, column b), Chapter 36 (begins with “Quod …” on line 4 on folio 1 verso, column a) and Chapter 39 (begins with “Rex …” on line 1 on folio 1 verso, column b) are present in MS 9/1:A22. However, Chapters 34 and 36 continue with no break and only the beginning of Chapter 39 is signaled with a paragraph mark (the sign that looks like a capital letter “C”). The initial R of the Latin word rex (“king” in English) that begins the chapter is also highlighted in red ink, although it is now somewhat faded. This shows that the text in the Spencer fragment is divided differently than how it is presented in the modern edition, and perhaps the manuscript as a whole was laid out differently from the other existing witnesses.

Parts of the text preserved in MS 9/1:A22 deal with Cordeilla, the youngest of the three daughters of King Leir, who became queen after her father’s forty-six year reign. In the Historia, Leir is credited with building a city by the river Soar, named after him Kaerleir in British, and Leicester in English. According to the story, Leir had no sons but three daughters: Gonorilla, Regau and Cordeilla. When the time came to marry his daughters and split his kingdom, he put them to a test to decide who would receive the largest share and asked each of his daughters how much they loved him. The elder daughters, who responded as their father wished, were married off to dukes of Cornwall and Scotland. Cordeilla, however, did not resort to flattery like her sisters did, and despite being the favorite of her father, she was punished by being married off to Aganippus, king of the Franks and sent away from Britain with no land or money. Leir split his kingdom and his wealth between his two elder daughters. As the King got older, he had a falling-out with both his elder daughters who eventually deprived him of his kingdom and royal authority. Running out of options, Leir sought out his youngest daughter Cordeilla, who, with her husband Aganippus, helped her father restore his power in Britain. Three years later, when he died, Cordeilla became the queen of Britain. This story, which first appears in Geoffrey’s Historia, was picked up by many later authors and inspired several works, including the famous King Lear by William Shakespeare (1564–1616).

As it stands, MS 9/1:A22 is less than half of the original leaf. Based on the stitch holes visible on the fold in the lower margin of the fragment, we can speculate that it was somehow bound in its current form, probably used as a flyleaf of another manuscript or printed book. We do not have any information about the origin or the early history of MS 9/1:A22, other than it was part of the famous library of Sir Thomas Phillipps (1792–1872), a detail which seems to have escaped notice until now.

On one side of the fragment there are annotations in pencil in modern hands that were inscribed prior to its acquisition by the University of Kansas: an encircled number “18” on the upper right corner and “XIth century” to the right in the lower margin. Based on other existing examples, it is possible to determine that the “XIth century” inscription was left by Ralph Lewis of William H. Robinson Ltd, a bookseller based in London that in 1946 purchased a thus far unsold portion of the library of Sir Thomas Phillipps. The fragments purchased from Phillipps’s library were sorted by Lewis, who noted down the century to which he thought a fragment was dated as well as a valuation. On his website, Peter Kidd, former Curator of Illuminated Manuscripts at the British Library, provides further examples of ownership marks and bookseller annotations, specifically those that are found on Phillipps manuscripts.

Store the medication at room temperature, in a cool place and away from direct sunlight. Do not freeze medications unless explicitly stated in the instructions. Keep medicines away from animals and children soma online. Do not flush medications down toilets or drains unless explicitly stated. Medicines disposed of in this way can be very harmful to the environment. Contact your physician for more information on the disposal of Soma Capsule / Soma Capsule.

Only the note on the date remains on MS 9/1:A22; Lewis’s eleventh century date, however, must be wrong given that this text did not even exist before the mid-twelfth century. This tells us that the bookseller had not yet identified the text and was making an educated guess. In addition to the date of the work, there are paleographical features, such as the consistent use of the crossed Tironian et sign (⁊) and round r after the letter o, which would indicate that this manuscript was copied at the earliest in the second half of the twelfth century. Features such as the letter a with a double bow, however, make it more likely that MS 9/1:A22 dates from the thirteenth century. The encircled number “18,” on the other hand was probably made by Bernard M. Rosenthal, a bookseller who operated first from New York and later from San Francisco, from whom the University of Kansas purchased several manuscripts and early printed books. I have not yet been able to locate an acquisition record for this fragment but it is likely that it was purchased from Bernard M. Rosenthal or one of his relatives, who were also renowned booksellers operating in Europe and who had regular dealings with the University of Kansas.

Kenneth Spencer Research Library also holds a 1517 edition of the Historia regum Britanniae printed in Paris, which is essentially a reprint of the first edition dated to 1508 apart from minor corrections (Summerfield B2889). Both the early edition and the manuscript fragment are available for consultation at the Library’s Marilyn Stokstad Reading Room when the library is open.

• Most recent studies on Geoffrey of Monmouth: A Companion to Geoffrey of Monmouth. Edited by Joshua Byron Smith and Georgia Henley. Brill’s Companions to European History 22. Leiden: Brill, 2020. [open access]
• Edition and translation to English: Geoffrey of Monmouth. The History of the Kings of Britain: An Edition and Translation of “De gestis Britonum” [“Historia regum Britanniae”]. Edited by Michael D. Reeve. Translated by Neil Wright. Arthurian Studies 19. Woodbridge: Boydell Press, 2007.
• Edition of the First Variant: The “Historia Regum Britannie” of Geoffrey of Monmouth. II. First Variant Version: A Critical Edition. Edited by Neil Wright. Woodbridge: Brewer, 1988.

N. Kıvılcım Yavuz
Ann Hyde Postdoctoral Researcher

Follow the account “Manuscripts &c.” on Twitter and Instagram for postings about manuscripts from the Kenneth Spencer Research Library.

During the summer of quarantine, I constructed quite a few bookbinding models to try out structures I was reading about or hadn’t made before. I decided to finally pursue my dream of constructing a medieval girdle book. This style of bookbinding is most easily identified by an extension of the covering material, which often ends in a knot. The extension and knot allow for the book to be attached to a belt and carried on the person.

Only twenty-three girdle books are known to exist today, but if we judge by their presence in medieval art, they were a popular commodity at the time. Manuscript books were luxury items, so their representation in art signifies wealth and prestige. Because these books were meant to be carried on the body, they are usually quite small.

Girdle books have a lot of components, many of which were difficult to acquire early in the pandemic. So I reached out to bookbinder and teacher Karen Hanmer to see if she would sell me the raw materials. She enthusiastically agreed, sending me every last component to make the book, as well as an in-depth instruction manual. Because I have bound books for many years, the manual was sufficient for completing the project. However, for someone new to bookbinding, I recommend taking her class in person.

The first step was to construct the text block. I folded papers into groups of four sheets each (called a section or quire). A piece of parchment, a type of animal skin, was hooked as an endsheet around the outer sheets of the first and last section. The sixteen sections were pressed under a board and heavy weight. After a few days, I sewed the sections on sets of linen cords, using a device called a sewing frame that holds the cords taut. The sewing structure used on this book is called “packed” sewing, which requires sewing around the double cords and looping around a few times in between each quire to add strength along the spine.

The sewing creates a natural round at the spine. In order to hold that shape, I placed the textblock in a press, further shaped the spine with my fingers, then attached parchment strips between the middle sewing supports with wheat starch paste. The parchment extended beyond the edge of the spine, to be attached to the inside of the boards.

The next step was to sew endbands at the top and bottom (head and tail) of the book. During the medieval era, the endband was sewn on a core (in this case, linen cord) that extended beyond the spine and was laced through the boards to add stability to the book. I chose to sew a primary endband using linen thread wrapped around a linen cord core. This style of endband has the bead (or thread pass-over) on the back. Then I sewed a secondary, decorative endband over it using blue and yellow silk thread, with a bead on the front.

The boards on medieval books were almost always made of wood. I’m not an experienced woodworker, so the wood shaping steps took a lot of time. I shaped the wood at the spine edge to accommodate the round of the textblock spine, on both the inside and outside of the wood piece. The other edges were beveled. Next I marked and drilled holes for the sewing and endband cords to lace through the wood, and chiseled channels between the two sets of holes. A channel was also cut and chiseled to accommodate a strap at the fore-edge

Once the cords were laced through and wedged in place, the book was ready to be covered. Karen offered me a few options, and I chose grey pigskin. I have repaired many books covered in pigskin but hadn’t bound any new ones in the material. As expected, pigskin was tougher and less pliable than calf or goatskin. Once dry, the vellum spine lining extensions would typically be adhered to the inside of the wooden boards. I decided to leave them unattached at the front and adhered at the back, since I will use this model as a teaching tool and I wanted to show steps in the bookbinding process.

To close the book, Karen suggested making a simple clasp from brass rod, with a brass escutcheon pin on the center edge of the top board. The strap is a laminate of pigskin and airplane linen. I laced the strap through the back board and adhered it on the inside in the channel cut into the wood. Medieval books were often written on animal skin, which has a spring to it, so clasps were necessary to keep the book closed.

Karen’s kit was so complete that she even included some finishing embellishments. A contrasting gray leather was used to create the traditional Turk’s head knot that is often found at the end of the leather extension. I decided to create a simple design on the outer covers with a bone folder, and added upholstery tacks as bosses (traditionally used to protect the leather when the book was placed on a surface). Karen thoughtfully even included tiny scraps of parchment to create markers on the edges of the book’s pages.

While this project took many evenings and weekends over a few months, I am very pleased with the results. I will add this model to our bookbinding model collection in Conservation Services, to teach bookbinding history to classes and public visitors.

Whitney Baker
Head, Conservation Services

Each week we’ll be posting a photograph from University Archives that shows a scene from KU’s past. We’ve also scanned more than 34,800 images from KU’s University Archives and made them available online; be sure to check them out!

This week we’re remembering former KU Chancellor Gene Budig, who passed away on Tuesday.

Caitlin Donnelly
Head of Public Services

We are periodically sharing some of the materials that are featured in Spencer Research Library’s North Gallery permanent exhibit. We hope you’ll be able to visit the library and explore the full exhibit in person! This week’s post highlights materials by and information about English ornithologist John Gould.

John Gould, an English ornithologist based in London, published large, lavishly illustrated books about birds of the world from 1830 until his death in 1881. Kenneth Spencer Research Library at the University of Kansas holds 47 large-format volumes published by Gould, as well as nearly 2000 preliminary drawings, watercolors, tracings, lithographic stones, and proof prints from his artistic workshop. Digitized a decade ago, our Gould collection has recently migrated to new Islandora software that makes searching for bird images within the volumes as easy as finding the separate pieces of preliminary art. The digitized Gould collection is accessible at the University of Kansas Libraries website.

The son of a humble gardener, John Gould had spent his boyhood in rural England. His youthful interest in birds and taxidermy would later grow into a career as a publisher of bird books. Hired in 1827 by the recently founded Zoological Society of London, his work maintaining their collection of bird skins enabled him to learn from member ornithologists. Gould and his wife Elizabeth, an amateur artist, ventured into ornithological publishing in 1830 with a book about birds of the Himalaya Mountains.

High-quality digital images downloaded from University of Kansas Libraries website are included here to help explain how the beautiful lithographic prints of birds that illustrate Gould’s books were made. Lithography was a chemical printing process based on the antipathy between grease and water. It involved drawing with greasy ink or crayon on blocks of fine-grained limestone imported from Germany. Invented in Bavaria about 1798 by Aloys Senefelder, lithography soon spread throughout Europe and beyond. By the mid 1800s lithography had replaced copper engraving as the preferred method for quality book illustration, because it was easier and faster (and therefore cheaper) to execute.

An initial rough sketch on paper, often drawn by John Gould himself, began the bird illustration process. The multiple lines and erasures on this sketch of two Asian ground thrushes (Pitta concinna) reflect Gould’s search for the best composition.

One of Gould’s artists, in this case William Hart, then developed the sketch into a detailed watercolor painting to be approved by Gould, who insisted on accurate proportions and coloring.

Next Hart copied the outlines onto tracing paper and blackened the reverse side with soft lead pencil. By laying the tracing paper on a block of limestone prepared for lithographic printing and re-tracing the outlines, he was able to transfer a non-printing guide image onto the printing surface.

Following the guide lines, Hart has used a greasy lithographic crayon to draw and shade the bird image on the lithographic stone. The stone had been rubbed with fine sand and water to give it a velvety texture or grain to which the crayon would adhere.

Close examination with a magnifier would show small irregular dots of crayon adhering to the grained surface of the stone. At normal reading distance, though, the viewer’s eye blends the tiny dots and perceives them as shades of gray.

Turning the drawing on stone into a printing image was a chemical process. First, the crayon drawing was lightly etched with a gum arabic solution, which adhered to the non-image areas and made the bare stone surface there more water receptive. The crayon image was then washed out with turpentine, which formed a thin coating on the image making it receptive to the greasy printing ink.

Next the printer placed the stone on the bed of a lithographic printing press. Before inking, the stone was wetted, so the greasy black ink would adhere only to the crayon image. A blank sheet of paper was then placed on the inked stone and pressed against it by a scraper bar to transfer the black ink onto the paper, forming the printed image.

After the ink had dried, the print was hand colored with watercolors, copying a colored master print (called a pattern plate) that had been approved by Gould. Gould’s colorer was Henry Bayfield, who employed the female members of his family to help with adding watercolor washes by hand to uncolored prints. The washes not only tinted the black print but also blended visually with the lithographic shading to convey the shape, color and texture of the feathered bodies of the birds.

Above, in the middle, the print of a pair of ground thrushes (Pitta concinna) illustrates Gould’s book about the Birds of New Guinea. On the facing page is Gould’s scientific description of the bird, set in metal type and printed by the relief letterpress process. After being printed separately, the parts of the book were issued in installments to subscribers, who had them bound as volumes once complete.

In vogue during the middle decades of the 19th century, such hand-colored lithographic prints of birds were superior in quality to the earlier hand-colored copper-engraved prints they had replaced. Although succeeded in the second half of the 19th century by color-printed chromolithographs, in the early 20th century by four-color process halftone photolithographs, and in the late 20th century by digital images, Gould’s hand-colored lithographic prints are still esteemed as quality bird images.

However, the Gould example is only one of the stories that could be told about lithography’s impact on the production of graphic images during the 19th century. This is because lithography’s versatility as a chemical process meant that it was not just one new technology but rather a cluster of image making technologies that could be used separately or combined in innovative ways. As well as drawing on grained stone with a crayon, early practitioners drew on polished stone with pen and ink, “engraved” (more accurately “scribed”) lines in a thin coating of gum arabic, or drew with lithographic ink on coated transfer paper. After the mid-19th century these were combined with new methods of transferring images to the printing surface and of printing in color (chromolithography) from multiple lithographic stones or (later) from metal plates. A ground-breaking example of chromolithography is Owen Jones’ book, Plans, elevations, sections, and details of the Alhambra (London, 1842-1845. Drawing flat areas of color on lithographic stones, one stone per color, he printed multi-colored illustrations in remarkably exact registration for his book, but this is a single example. The story of all the many technologies associated with chromolithography would fill a book, one which, in fact, has been well told by Michael Twyman in his 728-page book, A History of Chromolithography: Printed Colour for All (London: The British Library and New Castle, Delaware: Oak Knoll Press, 2013).

Karen Severud Cook
Special Collections Librarian

Each week we’ll be posting a photograph from University Archives that shows a scene from KU’s past. We’ve also scanned more than 34,800 images from KU’s University Archives and made them available online; be sure to check them out!

Caitlin Donnelly
Head of Public Services